The HiTek Power OLS10KD series high voltage power supplies recognize the requirement for high stability and very low ripple over a wide range of output voltages.
This is achieved by combining the high power, 10 kW supply with a low power, 1 kW supply in the same chassis. The outputs of these are coupled together so that either can be used. For high voltages, usually above 10% of the maximum, the High Energy (HE) supply is used; for voltages below 10% the Low Energy (LE) supply is used. The LE supply has superior ripple and regulation at the lower voltages and maintains this down to a few hundred Volts or less.
The OLS10KD series meets the exacting requirements found in electron and ion beam systems, ion implantation and X-ray systems. There are three different input voltage variants available
to order, the OLS10KD (208 VAC), the OLS10KDC (380 VAC) and the OLS10KDE (400 VAC). Designed using the latest power switching IGBTs to ensure efficient and reliable operation over the full operating range, the OLS10KD will give exemplary performance in the most severe of electrical environments. The OLS10KD achieves an exceptionally high packing density for high voltage power supplies of this power level, giving 169 W/Litre, 2.7 W/inch3. The 6U construction allows operation at full power when close-mounted in a standard equipment rack, giving significant savings in rack space in large systems. Many components are common between the HE and LE supplies, minimising the space required for the dual configuration. Featuring a unique Arc Count and Extinguish (ACE) system for managing systems where load arcing is endemic, the OLS10KD protects both itself and the load from damage that may be caused by excessive arcing whilst allowing normal operation to continue.
PRODUCT HIGHLIGHTS
Wide dynamic range with dual supply configuration
Output voltages from 10 kV to 100 kV for high range
Output voltages from 1 kV to 10 kV for low range
High Packing Density: 10 kW output power in 6U rack mounted chassis
Exceptional reliability in severe electrical enviroments
High Stability
Arc Count and Extinguish (ACE)
Full Local and Remote control and monitoring
Analogue or RS232 remote control
Voltage or current control
RoHS compliant to EU Directive 2011/65/EU
CE marked for EU LV Directive 2006/95/EC